The Neomounts AV2-500BL is a universal videobar kit for screens with a minimal size of 43" and VESA hole pattern ranging from 200x200 to 800x600 mm. The very sturdy, stable and versatile kit has a maximum weight capacity of 10 kg and can be installed either above or below the screen. For maximum adaptability, both the videobar support and the backplate brackets can be independently adjusted in height.
The AV2-500BL videobar kit is compatible with most videobars*, PTZ cams and soundbars, including Logitech Rally Plus speakers. To ensure a wide mounting applicability, the mounting holes can vary in width and height. The VESA frame can be adjusted both in height and width (200/400/600/800) and can be installed on wall, floor and even desk or ceiling mounts. Despite the numerous c
The Neomounts AV2-500BL is a universal videobar kit for screens with a minimal size of 43" and VESA hole pattern ranging from 200x200 to 800x600 mm. The very sturdy, stable and versatile kit has a maximum weight capacity of 10 kg and can be installed either above or below the screen. For maximum adaptability, both the videobar support and the backplate brackets can be independently adjusted in height.
The AV2-500BL videobar kit is compatible with most videobars*, PTZ cams and soundbars, including Logitech Rally Plus speakers. To ensure a wide mounting applicability, the mounting holes can vary in width and height. The VESA frame can be adjusted both in height and width (200/400/600/800) and can be installed on wall, floor and even desk or ceiling mounts. Despite the numerous choices, installation is easy, aided by ruler-guided alignment for a seamless screen installation.
* The Neomounts AV2-500BL videobar kit is universal and suitable for any type of videobar, regardless of make or model, within the range of the mounting bracket (see line drawing). In addition, the AV2-500BL is optimised for the following specific videobars:
- Bose Professional VB1 and VB-S
- Neat Bar and Bar Pro
- Poly Studio, Studio X70 and Studio X30
- Jabra Panacast 50
- Logitech Meetup, Rally Bar, Rally Bar Mini, Rally Bar Huddle and Rally Plus
- Cisco Webex Room Kit Plus
- Yealink MSpeaker II, MeetingBar A30, MeetingEye 400 and MeetingEye 600
The NewStar desk mount, model FPMA-DCB100DBLACK is a tilt-, swivel and rotatable desk mount for 2 flat screens up to 27”. This dual crossbar mount is a great choice for space saving placement on desks using a desk clamp or desk grommet.
NewStar's versatile tilt (+45°/-45°), rotate (360°) and swivel (30°) technology allows the...
The NewStar desk mount, model FPMA-D1330DSILVER is a tilt-, swivel and rotatable desk mount for 2 flat screens up to 24”. This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount.
NewStars’ unique tilt (15°), rotate (360°) and swivel (180°) technology allows the mount to change to any...
The Neomounts by Newstar desk mount, model FPMA-D890BLACK is a tilt-, swivel and rotatable desk mount for flat screens up to 30?. This mount is a great choice for space saving placement on desks using a desk stand. Neomounts by Newstar's versatile tilt (80°), rotate (360°) and swivel (60°) technology allows the mount to change to any...
The Neomounts by Newstar desk mount, model FPMA-D550DVBLACK is a tilt-, swivel and rotatable desk mount for 2 flat screens up to 32?. This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. Neomounts by Newstar's versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount...
The Neomounts by Newstar dual monitor adapter, model FPMA-CB200BLACK is a twin screen mounting rail allowing two monitors/flatscreens to be mounted on one flatscreen mount. Slide screens from left to right to fit side-by-side display. Provides independent screen adjustments and freely move the monitors along the horizontal rail without using tools.
-...
Professional Series Freestanding Single Monitor Arm
- Elevate your monitor to reduce eye, neck and shoulder strain.
- Freestanding design allows a monitor arm configuration in spaces that don’t allow clamp or grommet mounting.
- Simple design with built-in cable management minimizes clutter.
- Low profile, weighted base provides enhanced...
The DS70-250SL2 monitor arm features a nifty 180° stop mechanism, that prevents the mount from making contact with wall or separation panel when installed near it, while the integrated cable management system maintains a clutter-free desk.
The elegant black VESA plates of the NEXT Slim provide a perfect match with your screen, accommodating...
The NewStar ceiling mount, model FPMA-C100 is a tilt- and swivel ceiling mount for flat screens up to 26”. This mount is a great choice for space saving placement or when wall mounting and floor placement is not an option.
NewStars’ unique tilt (180°), rotate (360°) and swivel (180°) technology allows the mount to change to any...
The Neomounts AV2-500BL is a universal videobar kit for screens with a minimal size of 43" and VESA hole pattern ranging from 200x200 to 800x600 mm. The very sturdy, stable and versatile kit has a maximum weight capacity of 10 kg and can be installed either above or below the screen. For maximum adaptability, both the videobar support and the backplate brackets can be independently adjusted in height.
The AV2-500BL videobar kit is compatible with most videobars*, PTZ cams and soundbars, including Logitech Rally Plus speakers. To ensure a wide mounting applicability, the mounting holes can vary in width and height. The VESA frame can be adjusted both in height and width (200/400/600/800) and can be installed on wall, floor and even desk or ceiling mounts. Despite the numerous c
